Technical Area
For everything Status and technical
4258 posts | Last Activity on 14-01-2019 03:39 by Robin
Robin 14-01-2019 03:39, 6 years ago
Re: TB5 electronic
Anybody? just some pics of your S1 electronics cavaty please....Responded in TB5 electronic
steve-bbb 13-01-2019 21:13, 6 years ago
Re: John east
had a uni-pre in my matrix energy - great if you want it for studio work but a beast on steroids if you want it for gigging - the east circuits are very good and extremly well made but for controlability gigging i am going back to the original BP1 status board after refurbing the potsResponded in John east
steve-bbb 13-01-2019 20:03, 6 years ago
Re: BP1 board
Morning all - just bought new pots to renovate my Matrix Energy - does anybody have a schematic at all of the BP1 board? I have one found online for the board100 which does look very similar - just want to confirm a few of the connections as my old tone pot seems to be missing a wire from the pointer to the board maybe? TIAResponded in BP1 board
Robin 09-01-2019 05:18, 6 years ago
Re: TB5 electronic
Hello, Im ready to place a TB5 circuit on my Status bass, but I dont know where the connections have to go....Is there anyone with this TB5 electronics? It is from a S1 model.
So I need a diagram, or some photos of someone's S1 electronics, than I know where the wires has to go...
thank u
Responded in TB5 electronic
rogertvr 05-01-2019 15:13, 6 years ago
Re: Double ball strings
AmelnickDid you solve the string length problem?
Responded in Double ball strings
rockandroller 15-12-2018 20:39, 6 years ago
Re: What's the best STAND for Streamline???
Just to confirm, I now have the Herc GS405 b and it is a good fit for the Streamline 4.Its "forks" line up EXACTLY with the two strap buttons, so the bass sits nicely on them.
You do have to be a little precise on the placement, but it doesn't move once you get it placed.
_.jpg)
_.jpg)
Responded in What's the best STAND for Streamline???
Damn Yank 07-12-2018 05:49, 6 years ago
Re: Double ball strings
Short (pardon the pun) of ordering from Rob at Status, you can't go wrong with the Rotosound Swing Bass RDB66LD strings.They've worked beautifully on all my Statii.
Responded in Double ball strings
Sonic Groove 03-12-2018 01:04, 6 years ago
Re: D -TUNERS / BASS EXTENDERS
Wow!!Thanks UKL, that answers the question & gives an option. Might be best to just stand tell jokes and retune thou?? LOL
Responded in D -TUNERS / BASS EXTENDERS
UKLooney 01-12-2018 04:12, 6 years ago
Re: D -TUNERS / BASS EXTENDERS
Looks like they would foul on my S2. Probably wouldn't even fit it the first place.Maybe a custom option?
Responded in D -TUNERS / BASS EXTENDERS
Sonic Groove 30-11-2018 04:34, 6 years ago
Re: D -TUNERS / BASS EXTENDERS
So I don't have to bother Rob -- does anyone know if the D -TUNERS / BASS EXTENDERS as on the Status website can be fitted in pairs to two strings (B & E) or would the 2nd one in have its mechanism fouled by the first (if you see what I mean) Can't see from the picture how for they turn.Thanks
Brendan
Responded in D -TUNERS / BASS EXTENDERS
rockandroller 16-11-2018 22:54, 6 years ago
Re: Double ball strings
Quote
Stjohn714 wrote:
Quote
me4bass wrote:
...I would make sure that the ball on the string retainer end, is totally seated as far down as it can be.
Some string manufacturers appear to make their dubl-ball strings a bit shorter than Status.
Steinberger strings, from what I understand, are shorter than normal and do not fit Status basses.
I heard just the opposite: that Status uses EXACTLY the 'original standard' Steinberger string length.
Some of the Gibson (and other brand) 'steinbergers' are not 'standard steinberger length', though...
Responded in Double ball strings
Stjohn714 15-11-2018 19:06, 6 years ago
Re: Double ball strings
Quote
me4bass wrote:
...I would make sure that the ball on the string retainer end, is totally seated as far down as it can be.
Some string manufacturers appear to make their dubl-ball strings a bit shorter than Status.
Steinberger strings, from what I understand, are shorter than normal and do not fit Status basses.
Responded in Double ball strings
Jibudo 13-11-2018 03:07, 6 years ago
Re: S2 303 preamp question
I Think it's 100hz, i would describe it like it give's you usable fat bass, not cab destroyer sub bass, if this makes sense...Responded in S2 303 preamp question
Amelnick 09-11-2018 09:12, 6 years ago
Re: S2 303 preamp question
anyone know what the boost/cut freq. is on the bass control. Doesn't really seem to add much bass just seems to get louder.Responded in S2 303 preamp question
me4bass 07-11-2018 23:45, 6 years ago
Re: Double ball strings
...I would make sure that the ball on the string retainer end, is totally seated as far down as it can be.Some string manufacturers appear to make their dubl-ball strings a bit shorter than Status.
Responded in Double ball strings
Amelnick 07-11-2018 04:51, 6 years ago
Re: Double ball strings
headless bass. When I turn the knob to loosen the string it does not go far enough to put a new double ball string in.Responded in Double ball strings
bassbus 06-11-2018 20:35, 6 years ago
Re: Double ball strings
Headed or headless bass?Responded in Double ball strings
bassbus 06-11-2018 20:33, 6 years ago
Re: Double ball strings
Not sure what you mean by the "bridge does not go far forward enough". Do you mean the saddles? The saddles are adjustable. Under the string is a very small allen bolt which you loosen and then move it back and forth by hand. That's how you set the intonation. You have to loosen the string first to move the saddle.Responded in Double ball strings
Amelnick 06-11-2018 14:35, 6 years ago
Re: Double ball strings
Want to use double ball and nickel. Got a set of Daddario NYXL and can't quite fit. Seems the bridge does not go far forward enough. Is it adjustable? Any help appreciated. The bass is a 2014 S2.Responded in Double ball strings
rockandroller 02-11-2018 15:08, 6 years ago
Re: What's the best STAND for Streamline???
Nobody here has a 4-string streamline??Or are these basses just so good that nobody can put one down?
I have heard a suggestion about using a Hercules stand: ( this one: http://herculesstands.com/international/products/fretted-and-bowed-instrument/guitar/single-stands/gs405b/ ) - but it was for a Stealth, not a Streamline...
The GS405b is said to measure 5.25 inches center to center of the two bottom forks...
Responded in What's the best STAND for Streamline???
You can view all discussion threads in this forum.
You cannot start a new discussion thread in this forum.
You cannot start on a poll in this forum.
You cannot upload attachments in this forum.
You cannot download attachments in this forum.
You cannot start a new discussion thread in this forum.
You cannot start on a poll in this forum.
You cannot upload attachments in this forum.
You cannot download attachments in this forum.
Moderator: Administrator
