Thread subject: statii.com: For all things Status-Graphite :: Status Energy 5 headless graphite

Posted by Garbo28 on 16-08-2018 14:06
#4

In the status website, if you go to on line shop and active circuits there are pictures of all the circuit types, that should give you an idea if the electronics have changed. There seem to be two types used on the energy, the 'Board 100' and the 'Energy'. Your pictures do not look like the latter. Saying that it does not look like the former either.

Controls should be volume, centre notched pan and a centre notched treble cut and boost.

Looking at your picture you seem to have a 220k Linier pot in the tone location. Which is strange as in the active circuit descriptions, the energy had either a 10k or 100k linier cut boost. The 220k was used for the pick up balance

I might be wrong (and often am) but methinks someone has been playing with the wiring on your bass